Develop OpenWRT or LEDE on reliable hardware from Compex Systems
We have instructions designed to let developers with a degree of understanding in OpenWRT and our Embedded Boards to compile specific versions of OpenWRT to be flashed on our Embedded Boards.
An older and more detailed version exists here:
The firmware and SDK for OpenWRT can be downloaded from:
The boards supported are:
Disclaimer: Compex does not officially provide support for the usage of the open source wireless drivers with LEDE on the boards. We provide support for CompexWRT customers because the boards are designed to work best with the Qualcomm Atheros wireless drivers.
All LEDE related questions should be directed to the LEDE forum (https://forum.lede-project.org/). We regularly monitor and contribute to the LEDE as a voluntary service to the open source community.
We have instructions designed to let developers with a degree of understanding in LEDE and our Embedded Boards to compile specific versions of LEDE to be flashed on our Embedded Boards.
- WPJ344 LEDE Flash Instructions
- WPJ428 LEDE Flash Instructions
- WPJ558 LEDE Flash Instructions
- WPJ563 LEDE Flash Instructions
- WPQ864 LEDE Flash Instructions
The firmware for LEDE can be downloaded from:
NEW TENSILICA FIMRWARE-5.bin :
As Qualcomm introduces major changes on firmware, we as a manufacturer are updating our Tensilica firmware as well in order to provide greater benefits.
As mentioned Tensilica firmware is updated or enhanced with code changes or patches to address certain bugs.
Basically board-2bin files are included in the tensilica firmware, the customer will just have to load the files given to you on the previous mail.
This Tensilica firmware will also prevent customer to load the wrong board-2.bin file to prevent the files to get corrupted.
Please kindly forget about the board-2.bin , the tensilica firmware-5.bin has the board-2.bin in it whereby it is proper arranged,
so when the customer uses the firmware-5.bin to load it, the product won't be corrupted.
Do note that the new firmware works well with all Cascade and Besra series modules of Compex. Here are the following modules that are supported:
The following COMPEX boards supporting new Tensilica firmware: