Wodaplug EOC Slave+11n WiFi EOC1121R4WL-R, 600Mbps, WiFi, 4*LAN, 2*F, WEB Management

Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

new production batch will be available at the end of April


Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas - one internal + one external , 802.11bgn device with 300Mbps WiFi speed.

wifieoclsave features

eoc slave diferences

 

In stock
SKU
EOC1121R4WL-R
$69.90

We will send this product in 2 days. Read more...

Call us now for more info about our products.

Return purchased items and get all your money back.

Buy this product and earn 10 special loyalty points!


Wodaplug EOC Indoor Slave with 300Mbs WiFi speed router - EOC1121R4WL-R, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

new production batch will be available at the end of April


Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

EOC1121R4 series are for NGB next generation broadcast network, especially for Cable TV Operators. It is an advanced end equipment to carry out family bandwidth data access. EOC1121R4 is based on P1901 International Standard Protocol and HomePlug AV Protocol, with low-band and support big line-loss, long transmission distance.

The built in WiFi based on the single chip AR9331 which integrates an 802.11a 1x1 MAC radio with internal PA and LNA. It supports 802.11n operations up to 300Mbpcs for 40MHz channel respectively, and IEEE 802.11b/g data rates.

Based on REALTEK chipset solution of HomePlug AV and 11n WiFi technology
Work at low frequency between 7.5MHz~65MHz without influence on CATV service
Physical layer speed is 600Mbps and Max MAC layer throughout is 320Mbps
Support data encryption for both uplink and downlink
Support 4*10/100Mbps Ethernet ports auto-negotiation function
Support slave(CPE) isolation
Support VLAN configuration based on slave’s Ethernet ports and 802.1q
Support bandwidth(speed) limitation for both uplink and downlink
Support QoS configuration based on slave port or VLAN
Support broadcast storm control
Support data packages count
Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on
Support WEB,CLI and SNMP management
Support on-line upgrading


default IP for management : http://192.168.1.1


For the software, there is no difference between the old and new slave. Please read new users guide. The full access and complete setting in Web could be realized via the admin access.
The new version wifi slave is more flexible in the application than before. It can controls the STB1 and STB2 ports which used as the Ethernet ports to setting the VLAN, rate-limiting, configuration,etc.
The LAN1 and LAN2 have the router feature which support the PPPoE. Moreover, The two mode can work at the same time.


Specification
Item Specification - Model Number - EOC1121R4WL-R
Chipset Reaktek, RTL8198
Protocol EOC standard : HomePlug AV/ IEEE P1901(Draft); Etherent protocol > IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE 802.3x,HTTP, SNMP, TELNET
Phisycal Speed 600Mbps
Modulation Bandwidth 7.5 MHz~65 MHz
Modulation Technology OFDM-2690-carriers,4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO
Max. Slave number 256
Encryption mode 128-bit AES encrypted
VLAN Support max. 16 VLANs
Limitation of port speed Support minimum 64Kbps granularity
QoS Support VLAN priority
Working mode CSMA/CA
Multicast support Support IGMP manage Multicast diagram
Management mode Support SNMP, WEB, CLI multi-managed mode

Interface Features
Ethernet Interface 4*10/100M Ports
Coax. Cable Interface 1*Female Connector, IP signal output


LED Indication
Ethernet Network connection indicator
Power Power connection indicator
Data Cable connection indicator

RF Performance
Impedance 75Ohm
Transmit Power 0±3dBm
Reflection loss >16dB
Insertion loss less than 1dB
Receiving sensitivity -65dB

Electrical Characteristics
Power Consumption ≦5W
Power Supply 12VAC/5A

Environment Features
Working Temperature 0℃~50℃
Storage Temperature -40℃~80℃
Working Humidity 10%~90%, non-condensation
Storage Humidity 5%~90%, non-condensation
Environmental standards RoHS

Physical characteristics
Product Size 160*120*28.5mm
Product Weight N.W.: 0.5kg G.W.: 0.52kg
WiFi Specification
Operating Mode > Router or Bridge
Frequency Range : 2,412-2,472GHz
Transmitting Speed : 11n [135Mbps]:standard + 802.11b/g standard /auto-negotiation/
Operating channels qty : 13
Spread Spectrum : DSSS, CCK and OFDM
Coding BPSK, QPSK, 16QAM and 64QAM
RF Power : 802.11b: 16.5±1dBm , 802.11g: 13±1dBm @ 54 Mbps; 14±1dBm @ 48 Mbps; 15±1dBm @ 6 ~ 36 Mbps ; 802.11n: 13±1dBm @ 54 Mbps; 14±1dBm @ 48 Mbps; 15±1dBm @ 6 ~ 36 Mbps
antenna : 4dBi (fixed)
RF Receiving Sensitivity : 802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps; -78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps 802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps; -79dBm @ 12 Mbps; -77dBm @ 18 Mbps; -74dBm @ 24 Mbps; -70dBm @ 36 Mbps; -66dBm @ 48 Mbps; -65dBm @ 54 Mbps 802.11n: -65dBm @ 65 MbpsHT40; -61dBm @ 135 MbpsHT40
Encryption Mode 802.11i Security: WEP-64/128, TKIP(WPA-PSK) and AES(WPA2-PSK)

 

FAQ :

 questions:

1.  what is template 301 (and 302), I can't find it in the list of template and modify it?

Template function is for user configure the slave convenient. There are a default template named “1”,  is for the all slave as a default configuration. You can modify the template 1 in the SlaveàTemplate.

As you enter a slave configuration windows (it use the template 1), when you changed the configuration, the system will save a private template for this slave. The private template number will be 300+Slave ID. The private template is used only for this slave.

2.  how many admins can be loged in? Where can I find loged in users?

No limit now. No record for it.

3.  if I understad right, WAN means interface to WIFI module (oposite to port3) not the RF interface?  Due to this STB1 (port1) and STB2 (port2) interfaces are always in bridge mode with or without VLAN?

Yes. WAN is connect to the port3.

STB1(Port1) and STB2(port2) is always in bridge mode.

STB1, STB2 is out from the 8305E switch chipset.

internal structure

4.  if i'am right in 3, why in WAN configuration of a slave over master web there are 4 LAN ports? In WAN setting from direct Slave web are only ports PORT1 and PORT2 that means LAN1 and LAN2 I think.

Because the WIFI module support 4 port max. In this slave, it have 2 ports LAN1 and LAN2. In other type , it have 4 ports. The WIFI management window display LAN1, LAN2, LAN3, LAN4 is compatible the 4Port product.

We will distinguish between different product in late version.

5.  what does it mean PIB and NVM?  - this we can reply but maybe your reply will be better :-) 

NVM is the software for 74 chipset.

PIB is configuration file of chipset.

6.  where is connected router inside the box?

Please see figure in 2.

7.  where are VLANs processed? 

Slave - Online - Click the MAC you want to configure , enter the window as below.

vlan config

 

8.  when I set management VLAN I can't set dynamic IP resp. I can but without effect, eth0 has no IP. The DHCP server was configured properly, there was no DISCOVER for DHCP from master.

This version do not support the DHCP+VLAN function.

It only support DHCP (no VLAN) and Static IP (VLAN or not).

9.  I can't disable SNMP on master

Software design so. It do not support disable SNMP.

10.  Enable web access in WAN Conf of a slave over master web always fails.

Master and WIFI used the VLAN 4093 for OAM. Please try add this VLAN.

We will try to optimize it to configure in default.

11. Change setting in WAN Conf of a slave over master web doesn't work. I set mode to route and after Apply I see change it to bridge etc, etc, etc. I'm not able to set what i want.

You need saving configuration as below.

save config

 

 

More Information
Brand Wodaplug
firmware http://www.wodaplug.com/download/EOC1121/
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account