Wodaplug ® WDS104GH 4GE EPON ONU, WEB Management, 4*10/100/1000Mbps

EPON ONU WDS104GH is designed mainly for FTTH ,FTTO application. EPON ONU FD104GH support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink GE PON port. 

ONU WDS104GH together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions. 

ONU WDS104GH has 1 PON port , 4*10/100/1000 Mbps BASE-T ports .

In stock
SKU
2112
$52.00

We will send this product in 2 days. Read more...

Call us now for more info about our products.

Return purchased items and get all your money back.

Buy this product and earn 10 special loyalty points!


wodapluglogo

WODAPLUG WDS104GH 4GE EPON ONU (4*10/100/1000Mbps)

WDS104HC2

 Brief Views

EPON ONU WDS104GH is designed mainly for FTTH ,FTTO application. EPON ONU FD104HC support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink GE PON port.

ONU WDS104GH together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.

 

ONU WDS104GH has 1 PON port , 4*10/1000 M BASE-T ports .

 

Passive Optical Network ( PON , Passive Optical Network ) consists of an optical line termination ( Optical Line Termination , OLT) at the central side of the network to which is attached a branched structure of optical splitters – splitters . These are connected end optical network unit ( Optical Network Unit , ONU ), most often in a tree , or ring or star topologies . The distance between the OLT and ONU can be up to 20 km .

 

EPON  units  are equiped by well known brand chipset Cortina CS8032, therefor wodaplug power and signal level is very high and provide for your future network fast stable conection. Heat rezistance was tested in long time period in real setups and its very good even in temperatures over 40C. 

Optical netwok behave transparently as smart switch,  VLAN can be configured for each port of end ONU units. Configuration of ONU is easy thanks to preconfigured templates ( 4 and 8 ports OLT units has template management in base version ! !  ) Newly connected ONU unit automaticly downloads configuration from previosely set template (provisioning). Configuration  OLT unit is possible 1. thru supplied EMS configuration software – central management ) based on SNMP (needs mySQL and reqiure additional SW instalation on master managing PC) or 2. by  telnet and CLI (standard command line interface). Wodaplug units supports SNMP (mibs) protocol.

 

 Functional Feature

  • Support port-based rate limitation and bandwidth control;
  • In compliant with IEEE802.3ah Standard
  • Up to 20KM transmission Distance
  • Support data encryption, group broadcasting, port Vlan separation , etc.
  • Support Dynamic Bandwidth Allocation (DBA)
  • Support ONU auto-discovery/Link detection/remote upgrade of software;
  • Support VLAN division and user separation to avoid broadcast storm;
  • Support power-off alarm function ,easy for link problem detection
  • Support broadcasting storm resistance function
  • Support port isolation between different ports
  • Support ACL and SNMP to configure data packet filter flexibly
  • Specialized design for system breakdown prevention to maintain stable system
  • Support software online upgrading
  • EMS network management based on SNMP ,convenient for maintenance

  Application

  • Typical Solution: FTTH, FTTX
  • Typical Business: INTERNET、IPTV、IP Camera

eponapplication

 Specification

Item

Parameter

PON Interface

1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM

User Ethernet
Interface

4*10/100/1000M auto-negotiation
Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance

Power Interface

12V DC Power supply

PON

Optical

Parameter

Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: 0~4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm
Connector Type: SC
Optical Fiber: 9/125ɥm single-mode fiber

Data Transmission
Parameter

PON Throughput: Downstream 950Mbps; Upstream 930Mbps
Ethernet: 1000Mbps(FD104GH),1000Mbps(FD112H)
Packet Loss Ratio: <1*10E-12
latency: <1.5ms

Business
Capability

Layer 2 wire speed switching

Support VLAN TAG/UNTAG,VLAN conversion

Support Port-based speed limitation

Support Priority classification

Support storm control of broadcast

Support link detection

Network
Management

Support IEEE802.3 QAM, ONU can be remotely managed by OLT

Support Remote management through SNMP and Telnet

Local management

Management
Function

Status monitor, Configuration management, Alarm management,
Log management

LED Indicator

PWR: Power up or down

OPTIN: Optical Link Status

LINK:ONU Registered

LAN: Link Status of Ethernet Interface

Shell

Plastic casing

Power

External 12V 0.5A AC/DC power supply adapter

Power consumption: <  2.5W

Physical
Specifications

Item Dimension:160mm(L) x 120mm(W) x 32.5mm (H)

Item weight:0.2kg

Environmental
Specifications

Operating temperature:  0 to 50 ºC
Storage temperature: -40 to 85 ºC
Operating humidity: 10% to 90% (Non-condensing)
Storage humidity: 10% to 90% (Non-condensing)

 

More Information
Brand Wodaplug
firmware Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account